Yes, with the right selection savings of up to 50% can be realized with the service package for cable carrier systems!

KABELSCHLEPP Cable Stocks

Instead of confusing and expensive variety (some suppliers offer up to 30 different series), the compact structured cable program is suitable for more than 90 % of all applications with a standard stock program which has been reduced to 3 series.

The proven product series LIFE-LINE Safety Cables furthermore offers a favorable solution from only one company with special solutions even for most difficult cases for „chain + cable“ – applications.

Due to a clear structure of this program a quick and accurate selection is possible, for example in terms of possible load cycles under standard conditions such as

• LIFE-LINE Series 200 for load cycles up to 2 Million.
• LIFE-LINE Series 400 for load cycles up to 4 Million.
• LIFE-LINE Series 700 for load cycles up to 7 Million and more.

The dynamic application parameter are fixed for each application and immediately lead to the „correct“ line after a simple selection. Correct means: Functioning of all technical parameter by the selection of the „most favorable“ line series. Most  favorable means: After clarification of the required lifetime for the cable carrier system the number of yearly load cycles is determined. This is the basis for the selection of the series to be used. Therefore the number of yearly load cycles is the central, cost relevant guideline for the selection of the technically and commercially best solution.

How can savings actually be achieved?

• Low project costs through continuous quality of the basic equipment with guarantee for the cable drag chain together with the service package from one company
  By means of correct selection of the „right“ series costly replacement assemblies are saved. The lifetime is regulated in a separate guarantee agreement.
• Discussion and definition of the required lifetime of chain and cables
  After checking the application parameter for the project the minimum required quality of the cables is determined cost effectively by for example the requested number of load cycles.
• Reduction to only one series for the project and the purchase
  In practice different expensive series are found in one and the same chain with for example PVC-, PUR- and TPE – sheath. Here the standardization of the quality is a useful aim for the reduction of unnecessary and expensive variety.
• Cost orientated complete projection at one company
  Through a reduction of the departments involved for projection and purchase further savings can be achieved by the complete system supplier and are passed on to the customer.
• Considerable time and cost savings during assembly at site
  Final assembly by using ready-to-install complete systems due to the pre-assembly of chains and inserted cable package.

KabelSchlepp America, Inc., is located at:
7100 West Marcia Road
Milwaukee, WI 53223-3363 USA.
Phone: (414) 354-1994
Fax: (414) 354-1900
E-mail: info@kabelschlepp.com
Website: http://www.kabelschlepp.com

(KSA-135)